ELECTRICAL

Scroll down to view all items in our electrical products category.
CALL US OR

FOR PRODUCT INQUIRIES



(click images for large view)

24 Volt HP Radiator Fan (16")






>>> PERFORMANCE NUMBERS <<<

>>> PERFORMANCE GRAPH <<<

Electric fans are ideal for O.E. replacement, supplemental or add-on cooling needs. As a primary cooling source electric fans provide economical replacement for failed OE parts, with a 5-10% increase in horsepower and fuel mileage when replacing belt-driven fan assemblies. As an add-on cooling source electric fans provide increased air conditioning performance due to constant airflow across the condenser, with additional cooling in heavy traffic or while towing, or driving off-road.

The 24 volt High-Performance 16" Radiator Fan is designed for military or ex-military vehicles with 24 volt electrical systems (Uni-Mog, Pinzgauer, HumVee, Land Rover, Volvo, Deuce & a half, etc.).

Adjustable 24 volt thermostat available (see link below).

Reversible push/pull blades.
High quality, long life motors.
Thin, aerodynamic profile for applications with limited space.
Full fingerguard shroud.
16" high performance.
Super Quiet hi-flow S-Blade Design.

Note: This item is shipped set-up as a puller fan. To use as a pusher fan, undo front retaining clip and turn over the fan blade assembly. Re-attach clip and wire with reverse polarity.

U.S. SHIPMENTS (lower 48)
$149.99





12 or 24 Volt Thermostat


(click image for large view)

Installation Instructions


The 24 volt thermostat is a robust model and is ideal for use with our 24 volt radiator fan (see link below). Fully adjustable to your vehicle's individual performance. (12 volt also available)

Adjustable from 32-248 F.
Radiator Temperature activation.
Radiator mounted probe.
No relay required.

Packing List Includes
thermostat with probe.
Mounting bracket & hardware, 16ft. wire.
Wire connector (2), Butt connector (2).
Foam pad.
Probe mounting strap.
Clip.

U.S. SHIPMENTS (lower 48)







Cooling Fan Zip Tie Mounting Kit


(click image for large view)

This 4-piece Zip Tie Kit is the simplest and most effective way of installing our 24 volt fans to your radiator.

For installation of cooling fans.
Kit contains nylon mounting rods foam pads and locking buttons.
Set of 4.

U.S. SHIPMENTS (lower 48)





10 Amp DC-DC Voltage Converter


(click image for large view)


Our DC to DC converters now have an extended input range. Designed for use on 24-80 volt equipment to provide a regulated 13.8 VDC output. Our standard (SD) DC-DC Converter is a 10 Amp, 140 Watt (continuous) unit. Heavy-Duty High Voltage DC to DC Converter with built-In Spike Filter. For operating standard 12 VDC equipment (lights, radios, cellular and tablet chargers, computers) from non-standard electrical systems. With the 24v-12v voltage reducer, you can run 12 volt auxiliary lights or any other 12 volt unit from your 24 volt truck.

Is your vehicle ex-military with a 24 volt system? Double battery 24 volt systems are superior in many ways to 12 volt models. Don't even think about converting the entire system to 12 volts. Also, it is not recommended to draw power from one battery only. Just use a converter to step down the voltage to power the 12 volt appliance.

Dimensions: 5.75"L x 2.25"H x 3.625"W
Input Voltage Range: 22-100 VDC
Input Current: 100-200mA (no load); 1.8A (100V)-7.1A (22V) (full load)
Output Voltage: 13.5-13.9 Volt
Output Current (full load): 10.0-12.0A
Load Regulation (0.5-10A): 0.03-0.15 VDC

The recommended solution for ex-military vehicles or any vehicles with 24 volt electrical systems.
(We ship regularly to regional Fire Departments using 24 volt HumVees and Deuce and a Halfs)

DC-DC Converter Features:
Switched Voltage Regulated.
High Efficiency.
10A Continuous Current.
Current Limited.
Short Circuit Protected.
Under/Over/Reverse voltage lockout.
Thermal Protected.
Soft Start (for starting inductive loads).
Over Voltage Protected.
EMI-Noise resistance.
Input and Output Filtering.
Weatherproof.
Vibration resistant.
Housing is electrically isolated from circuits.
UL & CE Certified.
Assembled in the USA.
U.S. SHIPMENTS (lower 48)
$329.99



15 Amp DC-DC Voltage Reducer


(click image for large view)


Our DC to DC converters now have an extended input range. Designed for use on 24-48 volt equipment to provide a regulated 13.8 VDC output. Our heavy-duty (HD) DC-DC Converter is a 15 Amp, 210 Watt (continuous) unit. With the 15 Amp voltage reducer, you can run 12 volt auxiliary lights or any other 12 volt unit from your 24 volt truck.

Is your vehicle ex-military with a 24 volt system? Double battery 24 volt systems are superior in many ways to 12 volt models. Don't even think about converting the entire system to 12 volts. Also, it is not recommended to draw power from one battery only. Just use a converter to step down the voltage to power the 12 volt appliance.

6-1/4"L x 2"H 4-1/4"W.
Weighs 3 lbs.
Weather Proof.
15 amp fused input.
Thermal protected.
Vibration resistant.
High efficiency.
Converts from range 18-50 volts to 13.8 volts.

The recommended solution for ex-military vehicles or any vehicles with 24 volt electrical systems.
(We ship regularly to regional Fire Departments using 24 volt HumVees and Deuce and a Halfs)

DC-DC Converter Features:
Switched Voltage Regulated.
High Efficiency.
15A Continuous Current.
Current Limited.
Chaos Latching.
Short Circuit Protected.
Reverse Voltage Protected.
Thermal Protected.
Soft Start.
Over Voltage Protected.
Shielded Against Noise and RF Interference.
Input and Output Filtering. Built-in spike filter.
Minimum and Maximum Voltage Lockouts.
5th wire for ignition on/off sensing.
UL & CE Certified.
Assembled in the USA.
U.S. SHIPMENTS (lower 48)
$299.99



20 Amp DC-DC Voltage Converter


(click image for large view)


Our DC to DC converters now have an extended input range. Designed for use on 24-80 volt equipment to provide a regulated 13.8 VDC output. 20 Amp, 280 Watt (continuous) unit. Heavy-Duty High Voltage DC to DC Converter with built-In Spike Filter. For operating standard 12 VDC equipment (lights, radios, cellular and tablet chargers, computers) from non-standard electrical systems. With the 24v-12v voltage reducer, you can run 12 volt auxiliary lights or any other 12 volt unit from your 24 volt truck.

Is your vehicle ex-military with a 24 volt system? Double battery 24 volt systems are superior in many ways to 12 volt models. Don't even think about converting the entire system to 12 volts. Also, it is not recommended to draw power from one battery only. Just use a converter to step down the voltage to power the 12 volt appliance.

Dimensions: 5.75"L x 2.25"H x 3.625"W
Input Voltage Range: 22-100 VDC
Input Current: 100-200mA (no load); 3.9A (100V)-15.2A (22V) (full load)
Output Voltage: 13.5-13.9 Volt
Output Current (full load): 20.0-22.0A
Load Regulation (0.5-20A): 0.03-0.25 VDC

The recommended solution for ex-military vehicles or any vehicles with 24 volt electrical systems.
(We ship regularly to regional Fire Departments using 24 volt HumVees and Deuce and a Halfs)

DC-DC Converter Features:
Switched Voltage Regulated.
High Efficiency.
20A Continuous Current.
Current Limited.
Short Circuit Protected.
Under/Over/Reverse voltage lockout.
Thermal Protected.
Soft Start (for starting inductive loads).
Over Voltage Protected.
EMI-Noise resistance.
Input and Output Filtering.
Weatherproof.
Vibration resistant.
Housing is electrically isolated from circuits.
UL & CE Certified.
Assembled in the USA.
U.S. SHIPMENTS (lower 48)
$349.99



30 Amp DC-DC Voltage Converter


(click image for large view)


Our DC to DC converters now have an extended input range. Designed for use on 24-80 volt equipment to provide a regulated 13.8 VDC output. 30 Amp, 420 Watt (continuous) unit. Heavy-Duty High Voltage DC to DC Converter with built-In Spike Filter. For operating standard 12 VDC equipment (lights, radios, cellular and tablet chargers, computers) from non-standard electrical systems. With the 24v-12v voltage reducer, you can run 12 volt auxiliary lights or any other 12 volt unit from your 24 volt truck.

Is your vehicle ex-military with a 24 volt system? Double battery 24 volt systems are superior in many ways to 12 volt models. Don't even think about converting the entire system to 12 volts. Also, it is not recommended to draw power from one battery only. Just use a converter to step down the voltage to power the 12 volt appliance.

Dimensions: 5.75"L x 2.25"H x 3.625"W
Input Voltage Range: 22-100 VDC
Input Current: 100-200mA (no load); 6.2A (100V)-22.8A (22V) (full load)
Output Voltage: 13.5-13.9 Volt
Output Current (full load): 30.0-32.0A
Load Regulation (0.5-30A): 0.03-0.35 VDC

The recommended solution for ex-military vehicles or any vehicles with 24 volt electrical systems.
(We ship regularly to regional Fire Departments using 24 volt HumVees and Deuce and a Halfs)

DC-DC Converter Features:
Switched Voltage Regulated.
High Efficiency.
30A Continuous Current.
Current Limited.
Short Circuit Protected.
Under/Over/Reverse voltage lockout.
Thermal Protected.
Soft Start (for starting inductive loads).
Over Voltage Protected.
EMI-Noise resistance.
Input and Output Filtering.
Weatherproof.
Vibration resistant.
Housing is electrically isolated from circuits.
UL & CE Certified.
Assembled in the USA.
U.S. SHIPMENTS (lower 48)
$429.99



Fuse Block - 6 & 12 Circuit


(click images for large view)


These 6 & 12 circuit fuse blocks work excellently with our 24-12 volt converters. For example, it allows you to run 6 or 12 individually fused 12 volt circuits from your vehicle's electrical system. For ex-military vehicles, it allows running 6 or 12 individually fused 12 volt circuits from a single 24-12 volt converter, or 6 or 12 individually fused 24 volt circuits directly from a vehicle's 24 volt electrical system.

Integrated negative bus.
Tin-plated copper buses and fuse clips.
Accepts ATO and ATC fast acting fuses (1-40 amps).
Reinforced Polycarbonate base. Clear Polycarbonate cover.
Cover insulates all conductive parts.
Label recess for small format labels.
Max Amperage per circuit 30 Amps.
Max Amperage per block 100 Amps.
Max Voltage 32 Volts DC.
Amp rating at 50 C Max ambient.
6 Pin Dimensions: 5" x 3.3" x 1.5".
12 Pin Dimensions: 6.5" x 3.3" x 1.5".
Easy mounting and hook-up.
U.S. made.
U.S. SHIPMENTS (lower 48)





Heavy-Duty Jumper Cables


(click image for large view)


Go Prepared! Professional jumper cables (booster cables). Unlike cheaper jumper cables, the handles won't twist or slip off, and the teeth remain sharp and grip well. Perfect for any emergency. Our jumper cables, are extra-long for convenient use, allowing use for the stopped vehicle in front. Fits Top & Side Mount Battery Posts.

Note: Gauge: Jumper cable ranges vary from 2 gauge to 12 gauge. Based on the scale, the 2 gauge is the heaviest duty model, while the 12 is a light-duty option.Remember the lower the number the better. Thick cables carry more electricity, allowing you to jump the battery faster.

Two sizes Available.
16 ft. 6 Gauge.
20 ft. 4 Gauge.
Heavy-duty clamps.
Glow-in-the-dark polarity labels.
Ergonomic handles.
Insulation flexible to -40 F.

Don't just throw those cables in the back! Store them carefully in our handy storage bag, and they'll be there for you when you need them. Holds lots more too.
U.S. SHIPMENTS (lower 48)





(click image for large view)

QC Booster Assembly


(click image for large view)


QC Booster Assembly has:
- Quick-connect winch cable plug.
- 20' cable w/ battery clips & plug.

Always ensure that a quality receiver hitch that is rated for your vehicle is used to accept a self-recovery winch cradle.

If you have a winch mounted on a winch cradle enabling it to be used on several vehicles, you will need our Quick-Connect Booster Assembly. Instead of hard-wiring the winch to the battery, use the assembly with battery clips to quickly hook-up the winch on the go for easy removal and quick-connect functionality. The quick-connect booster assembly allows you to completely remove your winch from your vehicle for daily driving, and to use it with any vehicle that has a quality receiver hitch.

Our Quick-Connect Booster Assembly is professionally assembled and shipped ready for (ab)use.

For use with all 4x4 electric winches.
175 amp rating.
#2 gauge cable, 20 ft. length.
Extreme temp range -55°C to -105°C.
resistant to oil, gas, sun, salt & chemicals.
Heavy-duty polycarbonate plugs.
HD battery clips.
Made in USA.
U.S. SHIPMENTS (lower 48)
$259.99





Winch Quick-Connect Plugs



(click images for large view)



If your winch is mounted on a winch cradle enabling it to be used on the front or back of your vehicle you will need quick-connect plugs. Instead of hard-wiring the winch to the battery, use our plugs on the battery cables from the winch for quick-connect functionality. A quick-connect winch system also allows you to completely remove your winch from your vehicle for daily driving.

For use with all 4x4 electric winches.
Will fit 2-4 gauge cable.
175 amp rating.
Heavy-duty polycarbonate plug.
One plug mounts to your truck bumper.
One plug attaches to winch leads.
U.S. made.

Note: Quick-connect plugs have plus (+) and minus (-) symbols (positive and ground). Therefore, it is impossible to insert the plug the wrong way. Positive lines up with positive, and ground will always line up with ground.
U.S. SHIPMENTS (lower 48)







Quick-Connect plug Cover


(click image for large view)

The quick-connect cover keeps contacts clean by keeping the elements out when plug is not in use.

For our 175 Amp Quick Connect Plugs.
Incorporated rubber strap.
U.S. made.
U.S. SHIPMENTS (lower 48)
$9.99





Disclaimer. Please read: The effectiveness of this equipment is directly related to the manner in which it is installed, used (for off-road use only), and/or maintained. Proper installation, use and maintenance is solely the responsibility of the installer/user, and will not be assumed by Billet4X4.com.